 |
Solar Module - MM220G (BIPV) |
|
Features
|
 |
The most
reliable quality |
|
|
Good
conversion efficiency of solar
module (*efficiency to be affected
by glass thickness) |
|
|
Effectively
minimize the power drop by the shade |
|
|
High-level
protection for severe environment |
|
|
High quality
glass provides for less reflection
of incoming sunrays |
|
|
Warranty of
minimal power output 80% at STC for
20 years |
|
|
Custom-made
possible: Glass thickness could be
specified upon request or according
to a design recommended by the
professional structure-engineering
technician. |
|
 |
Product Characteristics
|
Model Type |
MM200G |
|
Nominal Peak Power, Pmax |
200W ± 5% |
|
Peak Power Voltage, Vpm |
28.61 V |
|
Peak Power Current, Ipm |
7.00 A |
|
Open Circuit Voltage, Voc |
36.19 V |
|
Short Circuit Current, Isc |
7.58 A |
|
Module Efficiency |
10.66% |
*STC: Standard Test Condition,
1000W/m2, AM 1.5, 25°
C
System
Integration Parameter
|
Maximum System Voltage |
1000VDC (600VDC in US) |
|
Series Fuse Rating |
10A |
|
Operating Temperature |
-40 to 85° C |
Thermal
Characteristics
|
Temperature Coefficient TK Pmax (Peak Power) |
-0.52%/°C |
|
Temperature Coefficient TK Voc (Open Circuit
Voltage) |
-0.38%/°C |
|
Temperature Coefficient TK Isc (Short
Circuit Current) |
+0.03%/°C |
Component Materials
|
Cell Qty per Module |
60pcs |
|
Cell Type |
Mono-crystalline Silicon |
|
Cell Dimensions |
156 x 156 mm |
|
Laminate Construction |
Front: Tempered Glass
Encapsulation: Solar Cells Embedded in EVA
(Ethylene-Vinyl-Acetate)
Rear: Tempered Glass |
|
Glass |
Low-Iron Tempered Glass.
Front Side: 5mm (Basic design = 5mm. >5mm or
above, ex. 6mm, custom-made possible)
Back Side: 6mm (Basic design = 6mm. >6mm or
above, ex. 7mm, custom-made possible) |
|
Junction Box |
IP65 Junction Box (TÜV Certified) |
|
Bypass Diodes |
3 pcs |
|
Cable |
2 Cables (TÜV Certified) |
|
Connector |
TÜV Certified |
Performance
Warranty
|
90% Output |
10Years |
|
80% Output |
20Years |
Quality
Assurance
|
ISO 9001:2000 Quality Management |
Certified |
|
IEC 61215:2005 |
TÜV certified |
|
EN 61730-1 & EN 61730-2:2007 |
TÜV certified |
|
1. Electrical Insulation Test |
|
2. Outdoor Exposure Test |
|
3. Hot-Spot Endurance Test |
|
4. UV-exposure |
|
5. Thermal Cycling Test |
|
6. Humidity Freeze Test |
|
7. Damp Heat Test |
|
8. Robustness of Terminations Test |
|
9. Wet Leakage Current Test |
|
10. Mechanical Load Test |
|
11. Hail Impact Test |
|
12. Bypass Diode Thermal Test |
Physical Specifications
|
Dimension [L x W x H] |
1760 x 1066 x 13 mm |
|
Weight (Kg) |
56 Kg |
Packing Specifications
|
Modules Per Box |
Packing design to be specified by customer |
|
Module Per Pallet |
Packing design to be specified by customer |
|
20ft Container Capacity |
Packing design to be specified by customer |
|
40ft Container Capacity |
Packing design to be specified by customer |
 |
